LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1587 (Emissions Control) >> Exhaust Gas RECIRCULATION >> Sensor, EGR Temperature >> Installation

Sensor, EGR Temperature: Installation

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean EGR crossover tube at sensor mounting point.
  2. Install EGR temperature sensor to EGR tube. Tighten to 18 N.m (159 in. lbs.).
  3. Connect EGR temperature sensor harness connector.
  4. Install the engine cover.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals