LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1587 (Emissions Control) >> Exhaust Gas RECIRCULATION, 6.7L Diesel >> Valve, Exhaust Gas RECIRCULATION (EGR) Airflow Control >> Removal

Valve, Exhaust Gas RECIRCULATION (EGR) Airflow Control: Removal

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. GC0161582Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect and isolate both of the negative battery cables.
  3. Remove the engine oil dipstick (2).
  4. Remove bolts (1) and the engine cover (3).
    GC0169643Courtesy of CHRYSLER GROUP, LLC
  5. Detach the wire harness retainers (1) from the heat shield.
    GC0169678Courtesy of CHRYSLER GROUP, LLC
  6. Remove nut (1) and bolt (3) and the EGR control valve heat shield (2).
    GC0155380Courtesy of CHRYSLER GROUP, LLC
  7. Remove clamps (1, 3) and the inlet hose (3).
  8. Disconnect the EGR air flow control valve wire harness connector (2).
    GC0108834Courtesy of CHRYSLER GROUP, LLC
  9. Remove four mounting bolts (4, 6) and the EGR air flow control valve (5).
  10. Remove gasket (3) and discard.
scientia non olet · About LEMON Manuals