Sensor, EGR Temperature: Removal
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of CHRYSLER GROUP, LLC
|
- Disconnect and isolate both of the negative battery cables.
- Remove the engine oil dipstick (2).
- Remove bolts (1) and the engine cover (3).
 Courtesy of CHRYSLER GROUP, LLC
|
- Disconnect EGR Temperature Sensor (1) harness connector (2).
- Remove EGR Temperature Sensor (1) from EGR tube (6).