Valve, Positive Crankcase Ventilation (PCV): Removal
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
The PCV valve (4) is mounted into the top of the intake manifold (1). This is located to the right / rear of the throttle body (2).
- The PCV valve is sealed to the intake manifold with 2 O-rings (2).
- Remove PCV valve by rotating counter-clockwise 90 degrees until locating tabs (3) have been freed. After tabs have cleared, pull valve straight up from intake manifold.
- After valve is removed, check condition of 2 valve O-rings (2).