LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1587 (Emissions Control) >> Evaporative Emissions >> Solenoid, Evaporative Emissions Purge >> Installation

Solenoid, Evaporative Emissions Purge: Installation

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0154425Courtesy of CHRYSLER GROUP, LLC
  1. Connect vapor line quick-connect fitting (1) to solenoid.
  2. Connect vacuum line to the throttle body.
  3. Connect electrical wiring connector (3) to solenoid.
  4. Carefully push the solenoid assembly (2) straight down onto the tongue-type bracket without bending the vapor lines.
scientia non olet · About LEMON Manuals