LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1587 (Emissions Control) >> Evaporative Emissions, 6.7L Diesel >> System, Closed Crankcase Ventilation (CCV) >> Removal

System, Closed Crankcase Ventilation (CCV): Removal

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0161582Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate both of the negative battery cables.
  2. Remove the engine oil dipstick (3).
  3. Remove bolts (1) and the engine cover (2).
    GC0155113Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the crankcase pressure sensor wire harness connector (1).
  5. Remove the breather hose (2) from the breather cover.
    GC0155411Courtesy of CHRYSLER GROUP, LLC
    CAUTION:

    The use of air tools is not recommended as damage to the component may result.

  6. Remove the oil fill cap, the bolts (1) and the breather cover (2).
    GC0157557Courtesy of CHRYSLER GROUP, LLC
  7. Remove the breather element (1) from the cylinder head cover (2).
scientia non olet · About LEMON Manuals