LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1587 (Emissions Control) >> Evaporative Emissions, 6.7L Diesel >> Sensor, Crankcase Pressure >> Removal >> Crankcase Pressure Sensor 1

Crankcase Pressure Sensor 1

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0161582Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate both of the negative battery cables.
  2. Remove the engine oil dipstick (2).
  3. Remove bolts (1) and the engine cover (3).
    GC0110278Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the crankcase pressure sensor wire harness connector (7).
  5. Remove bolt (6) and the crankcase pressure sensor (5) from valve cover (4).
scientia non olet · About LEMON Manuals