Unit, Diesel Exhaust Fluid Dosing Control: Removal
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate both of the negative battery cables.
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Disconnect the body side Diesel Exhaust Fluid (DEF) dosing control unit wire harness connector (2).
- Disconnect the DEF pump wire harness connector (1).
- Remove the bolt (2) and the DEF dosing control unit (1) from DEF tank (3).