Line, Diesel Exhaust Fluid Supply: Removal
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate both of the negative battery cables.
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Remove nuts (2) and the DEF tank shield (1).
- Disconnect the DEF supply line heater wire harness connector.
- Disconnect the DEF supply line (3) to DEF pump (2).
- Disconnect the supply lines retaining clip.
- Disconnect the DEF supply line (1) from the dosing injector and remove the supply line.