LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1587 (Emissions Control) >> Diesel Exhaust Fluid Emissions >> Line, Diesel Exhaust Fluid Supply >> Installation

Line, Diesel Exhaust Fluid Supply: Installation

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0155206Courtesy of CHRYSLER GROUP, LLC
  1. Install the Diesel Exhaust Fluid (DEF) supply line (1) and connect to the dosing injector.
  2. Connect the supply line to routing clip.
    GC0155409Courtesy of CHRYSLER GROUP, LLC
  3. Connect the supply line (3) to the DEF pump (2).
  4. Disconnect the DEF supply line heater wire harness connector.
  5. Install the DEF pump shield.
  6. Remove support and lower the vehicle.
  7. Connect both negative battery cables.
scientia non olet · About LEMON Manuals