LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1587 (Emissions Control) >> Diesel Exhaust Fluid Emissions >> Injector, Diesel Exhaust Fluid >> Removal

Injector, Diesel Exhaust Fluid: Removal

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0155206Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate both of the negative battery cables.
  2. Disconnect the Diesel Exhaust Fluid (DEF) injector wire harness connector (2).
  3. Disconnect the DEF fluid supply line (1).
    GC0155325Courtesy of CHRYSLER GROUP, LLC
  4. Saturate the DEF injector bolts with Moper® Rust Inhibitor. Allow 5 minutes for penetration.
  5. Remove bolts (3) and the DEF injector (1) from the Selective Catalytic Reduction (SCR) catalyst (2).
  6. Remove and discard gasket.
scientia non olet · About LEMON Manuals