LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1584 (5.7L Engine CNG - (Service Information) - 2500 Hd) >> Engine Block >> Camshaft, Engine >> Removal >> Camshaft

Camshaft, Engine: Removal: Camshaft

WARNING: This page is about a different car, the 2018 RAM 2500 HD and 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable.
  2. Remove the air cleaner assembly. Refer to BODY, AIR CLEANER, REMOVAL  .
  3. Drain coolant. Refer to STANDARD PROCEDURE .
  4. Remove the EGR cooler. Refer to COOLER, EGR, REMOVAL .
  5. Remove the left and right cylinder heads. Refer to CYLINDER HEAD, REMOVAL  .
  6. Remove the radiator. Refer to RADIATOR, ENGINE COOLING, REMOVAL - GAS .
  7. Remove the oil pan. Refer to PAN, OIL, REMOVAL  .
  8. Remove timing case cover. Refer to COVER(S), ENGINE TIMING, REMOVAL  .
    GC0081771Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    Identify lifters to ensure installation in original location.

  9. Remove the tappets (2) and retainer (1) assembly.
    GC0088057Courtesy of CHRYSLER GROUP, LLC
  10. Remove the oil pick up tube (1).
    GC0088058Courtesy of CHRYSLER GROUP, LLC
  11. Remove the oil pump retaining bolts (2) and remove the oil pump (1).
    GC0088059Courtesy of CHRYSLER GROUP, LLC
  12. Remove timing chain (5). Refer to CHAIN AND SPROCKETS, TIMING, REMOVAL  .
    GC0088060Courtesy of CHRYSLER GROUP, LLC
  13. Remove camshaft thrust plate (1).
    GC0092120Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    Slowly rotate the camshaft while pulling camshaft out.

  14. Install a long bolt (2) into front of camshaft (1) to aid in removal of the camshaft. Remove camshaft, being careful not to damage cam bearings with the cam lobes.
scientia non olet · About LEMON Manuals