Rear Seat Air Outlets
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Illustration shown with front seat cushions removed for clarity.
- Remove the two screws (1) that secure the rear air outlet housing (2) to the rear of the front center seat support (3).
- Remove the rear air outlet housing and place it on a workbench.
- Using Tim Stick (special tool #C-4755, Trim Stick) or equivalent (1), disengage the retaining tabs that secure the rear air outlets (2) to the rear air outlet housing (3) and gently pry the outlets from the housing (3).