LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1582 (Heating & Air Conditioning - (Service Information) - 2500 Hd) >> Distribution >> Motor, Blower >> Installation

Motor, Blower: Installation

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0089565Courtesy of CHRYSLER GROUP, LLC
  1. Position the blower motor (2) into the bottom of the HVAC housing (4).
  2. Install the three screws (1) that secure the blower motor to the HVAC housing. Tighten the screws to 1.7 N.m (15 in. lbs.).
  3. Connect the HVAC wire harness lead (3) to the blower motor.
  4. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals