LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1582 (Heating & Air Conditioning - (Service Information) - 2500 Hd) >> Controls >> Sensor, Sun >> Installation

Sensor, Sun: Installation

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0089017Courtesy of CHRYSLER GROUP, LLC
  1. Align the tab on the sun sensor (1) with the opening in the panel (2).
  2. Gently push the sun sensor into the panel until the sensor snap retainers are securely engaged.
  3. Connect the instrument panel wire harness to the sun sensor and install the panel onto the instrument panel. Make sure the panel snap retainers are fully engaged.
  4. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals