LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1582 (Heating & Air Conditioning - (Service Information) - 2500 Hd) >> Controls >> Sensor, Ambient Temperature >> Installation

Sensor, Ambient Temperature: Installation

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0154640Courtesy of CHRYSLER GROUP, LLC
  1. Position the Ambient temperature sensor (2) into the panel (4) and rotate the sensor one quarter turn clockwise to engage the panel to the sensor retaining slot (1).
  2. Connect the electrical connector (3) to the ambient temperature sensor.
  3. Insert panel with ambient temperature sensor into the lower left side rear view mirror and gently snap into place.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals