LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1582 (Heating & Air Conditioning - (Service Information) - 2500 Hd) >> Controls >> Actuator, Blend Door >> Removal >> Dual Zone Passenger Side

Dual Zone Passenger Side

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0089507Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the HVAC housing (1) from the vehicle and place it on a workbench. Refer to HOUSING, HVAC, REMOVAL .
  3. Disconnect the HVAC wire harness connector (2) from the blend door actuator (3) located at the front of the HVAC housing.
  4. Remove the two screws (4) that secure the blend door actuator to the HVAC housing and remove the actuator.
scientia non olet · About LEMON Manuals