Assembly, Variable Valve Timing, 5.7L: Installation
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Align the slot (2) in the phaser (1) with the dowel on the camshaft.CAUTION:
Never attempt to disassemble the camshaft phaser, severe engine damage could result.
- Position the phaser (2) in place and install phaser retaining bolt (1) and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
- Install the engine timing cover. Refer to COVER(S), ENGINE TIMING, INSTALLATION .