Valve, Short Runner: Removal: 5.7L

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of CHRYSLER GROUP, LLC

Disconnect the negative battery cable (1).

Fig 1: Intake Manifold Loosening/Tightening Sequence
Courtesy of CHRYSLER GROUP, LLC
Remove the intake manifold and throttle body as an assembly. Refer to MANIFOLD, INTAKE, CNG, REMOVAL, 5.7L .

Courtesy of CHRYSLER GROUP, LLC
Remove the short runner valve actuator retaining bolts (1) and remove valve.

Courtesy of CHRYSLER GROUP, LLC
Remove and discard the short runner valve actuator rubber O-ring seal (1).