Sensor, Manifold Air Pressure (Map): Removal
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of CHRYSLER GROUP, LLC
|
The Manifold Absolute Pressure (MAP) sensor (1) is located at the right rear of the intake manifold (2).
- Disconnect the electrical connector (2) at the MAP sensor.
- Rotate the MAP sensor 1/4 turn counterclockwise for removal.
- Check the condition of the MAP sensor O-ring and replace if necessary.