Sensor, Crankshaft Position: Description
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of CHRYSLER GROUP, LLC
|
| 1 - CYLINDER BLOCK - RIGHT / REAR |
| 2 - ELEC. CONNECTOR |
| 3 - MOUNTING BOLT |
| 4 - CKP SENSOR |
The Crankshaft Position (CKP) (4) sensor is mounted into the right rear side of the cylinder block. It is positioned and bolted into a machined hole.