Sensor, Temperature, Intake Manifold: Installation
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of CHRYSLER GROUP, LLC
|
- Install the intake manifold temperature sensor (3) and tighten to
- Connect the intake manifold temperature sensor wire harness connector (2).
 Courtesy of CHRYSLER GROUP, LLC
|
- Install the engine cover (3) and the bolts (1) to 10 N.m (89 in. lbs.).
- Install the oil dipstick (2).
- Connect both of the negative battery cables.