Sensor, TMAP: Removal
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of CHRYSLER GROUP, LLC
|
- Disconnect and isolate both of the negative battery cables.
- Remove the engine oil dipstick (2).
- Remove the bolts (1) and the engine cover (3).
 Courtesy of CHRYSLER GROUP, LLC
|
- Clean the area around TMAP sensor (2).
- Disconnect the TMAP sensor wire harness connector (3).
- Remove the screw (1) and the TMAP sensor (2).