LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1580 (Fuel System - 2500 Hd) >> Fuel Injection, 6.7L Diesel >> Sensor, Mass Airflow (MAF) >> Installation

Sensor, Mass Airflow (MAF): Installation

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0108848Courtesy of CHRYSLER GROUP, LLC
  1. Check the condition of the sensor O-ring.
  2. Install the Mass Air Flow (MAF) sensor (4) into top of the air cleaner (7). Tighten screw (3) to 1 N.m (9 in. lbs.).
  3. Connect the MAF sensor wire harness connector (5).
  4. Connect both of the negative battery cables.
scientia non olet · About LEMON Manuals