Relay, Intake Air Heater: Installation
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of CHRYSLER GROUP, LLC
|
- Install the intake air heater relay (3). Tighten screws (2) to 5 N.m (44 in. lbs.).
 Courtesy of CHRYSLER GROUP, LLC
|
- Install cables (1 and 3) to mounting studs. Tighten nuts (2) 9 N.m (80 in. lbs.).
- Connect relay trigger wires (4) at relays.
- Connect both of the negative battery cables.