LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1580 (Fuel System - 2500 Hd) >> Fuel Delivery, CNG >> Relay, Fuel Pressure Shut-Off >> Removal

Relay, Fuel Pressure Shut-Off: Removal

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0155455Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the battery negative cable.
  2. Disconnect the shut-down relay (2) electrical connector.
  3. Remove the nut (3) from the pressure regulator bracket (1).
  4. Remove the relay from the vehicle.
scientia non olet · About LEMON Manuals