Receptacle, Fuel Fill: Installation
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Using care, route the filler line (3) through the access hole at the fender (4).
- Install the rubber grommet (2) onto the inner fender.
- Align the filler receptacle (2) to the fuel shroud.
- Install the CNG filler lock nut (1). Tighten to 45 N.m (33 ft. lbs.).
- Install the filler line (5) to the one way check valve at the quarter turn valve (2). Tighten the line to 5 N.m (44 in. lbs.).
- Check the fuel lines for leaks using an air leak detection fluid.
- Install the upper cylinder tank cover (2).