Tube, Fuel Tank Filler: Removal
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate both of the negative battery cables.
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Disconnect the DEF filler hose at filler neck tube (2).
- Disconnect the DEF vent hose at filler neck tube (1).
- Remove support and partially lower the vehicle.
- Remove the left rear wheel house splash shield. Refer to SHIELD, SPLASH, REAR WHEELHOUSE, REMOVAL
.
- Loosen clamp (4) and disconnect the diesel fuel filler tube.
- Loosen clamp (1) and disconnect the diesel fuel vent tube (2).
- Remove nut (5) securing the ground wire (5) to frame rail.
- Disconnect the fuel vapor hose (2) from tank fitting (1).
- Lower the vehicle.
- Remove the DEF cap (1).
- Remove screws and the fuel filler tube through wheel well.