Coil, Ignition: Removal
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of CHRYSLER GROUP, LLC
|
- Disconnect the electrical connector (1) from coil (3).
- Clean area at base of coil with compressed air before removal.
- Remove two mounting bolts (2) (note that mounting bolts are retained to coil).
 Courtesy of CHRYSLER GROUP, LLC
|
- Carefully pull up coil (1) from valve cover.
- Remove coil (1) from vehicle.