Coil, Ignition: Installation
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Using compressed air, blow out any dirt or contaminants from around top of spark plug.NOTE:
Use dielectric grease on each of the spark plug boots before installing the coil.
- Position ignition coil (1) into valve cover and push onto spark plugs.
- Install 2 coil mounting bolts (2). Tighten to 7 N.m (62 in. lbs.).
- Connect electrical connector (1) to coil by snapping into position.