LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1578 (Starting - (Service Information) - 2500 Hd) >> Starter >> Removal >> 6.7L Diesel

6.7L Diesel

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0154599Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate both negative battery cables.
  2. Raise and support vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  3. If equipped, remove bolts (2) and the left engine block stiffener (1).
    GC0108135Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect solenoid wire harness connector (3).
  5. Remove the B+ cable (1) dust cover.
  6. Remove nut (2) and the B+ cable (1) from stud.
  7. Remove three bolts (4) and starter motor from engine.
scientia non olet · About LEMON Manuals