LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1577 (6.4L Engine - (Service Information) - 2500 Hd) >> Lubrication >> Solenoid, Variable Valve Timing (VVTS), Exhaust >> Installation

Solenoid, Variable Valve Timing (VVTS), Exhaust: Installation

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0088008Courtesy of CHRYSLER GROUP, LLC
  1. Install the VVTS.
  2. Ensure that the O-ring is fully seated into the cylinder block.
  3. Securely tighten the VVTS fastener (1).
  4. Connect the VVTS electrical connector (2).
  5. Install the intake manifold. Refer to MANIFOLD, INTAKE, INSTALLATION  .
scientia non olet · About LEMON Manuals