LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1577 (6.4L Engine - (Service Information) - 2500 Hd) >> Engine Block >> Seal, Crankshaft Oil, Front >> Removal

Seal, Crankshaft Oil, Front: Removal

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0088068Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect negative cable from battery.
  2. Remove accessory drive belt. Refer to BELT, SERPENTINE, REMOVAL .
  3. Drain cooling system. Refer to STANDARD PROCEDURE .
  4. Remove upper radiator hose.
  5. Remove radiator shroud attaching fasteners.
  6. Remove radiator cooling fan and shroud. Refer to FAN, COOLING, VISCOUS, REMOVAL - 6.4L .
  7. Remove crankshaft damper bolt.
  8. Remove damper using Crankshaft Insert (special tool #8513A, Insert, Crankshaft) (2) and Three Jaw Puller (special tool #1023, Puller) (1). Refer to DAMPER, VIBRATION, REMOVAL  .
    GC0092146Courtesy of CHRYSLER GROUP, LLC
  9. Using Seal Remover (special tool #9071, Remover, Seal) (1), remove crankshaft front seal (2).
scientia non olet · About LEMON Manuals