Jet, Piston Oil Cooler: Installation
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Use caution when removing and installing oil jets. Damage to oil jet nozzle could cause severe engine damage.
- Lubricate oil jet O-ring seal.
- Install the oil jet (1). Tighten the bolt (2) to 15 N.m (11 ft. lbs.).
- Install the engine block stiffener (2). Tighten the bolts (1) to 43 N.m (32 ft. lbs.).
- Install the oil pan. Refer to PAN, OIL, INSTALLATION, 6.7L .
- Connect both of the negative battery cable.