High Output Engine
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
New bolts (5), clamp ring (4), and shims (1, 3) anytime the flex plate has been removed. Do not lubricate new bolts as they are already coated with an anti-scuff treatment.
NOTE:
Align the flex plate to hub paint marks, where applicable.
- Install the small friction shim (1), flex plate (2), large friction shim (3), clamping ring (4) and tighten bolts (5) finger tight.
- Use a crisscross pattern to tighten bolts to 137 N.m (101 ft. lbs.).
- Install the transmission. Refer to INSTALLATION .