LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1576 (6.7L Engine (Service Information) - 2500 Hd) >> Cylinder Head >> Rocker Arm, Valve >> Inspection >> Push Rods

Push Rods

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0108514Courtesy of CHRYSLER GROUP, LLC

Inspect the push rod ball and socket for signs of scoring. Check for cracks where the ball and the socket are pressed into the tube.

GC0108515Courtesy of CHRYSLER GROUP, LLC

Roll the push rod on a flat work surface with the socket end hanging off the edge. Replace any push rod that appears to be bent.