LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1575 (6.7L Diesel - DTCS P24A2 To U3017 - 2500 Hd) >> DTC Troubleshooting >> U02A3-Lost Communication With Pm Sensor >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

This diagnostic will run and fail if the PCM does not receive a data link message from the PM Sensor module for a calibrated amount of time. The PCM will light the Malfunction Indicator Lamp (MIL) after the diagnostic runs and fails in 2 consecutive drive cycles. The PCM will turn off the MIL when the diagnostic runs and passes in 4 consecutive drive cycles.

scientia non olet · About LEMON Manuals