Diagnostic Test

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

ACTIVE DTC
NOTE:
If DTCs P2481, P2482, P2483, P24D0, U04A4, or U02A3 are present, perform the diagnostics for those DTCs before continuing with this one.
1. Ignition on, engine not running.
2. Using the scan tool, read DTCs.
  Is this DTC active?
  
  Yes
  - Go To 2
  No
  - Perform the INTERMITTENT CONDITION - DIESEL diagnostic procedure. Refer to INTERMITTENT CONDITION .
CHECK FOR TECHNICAL SERVICE BULLETIN OR SOFTWARE UPDATE
1. Check for any applicable Technical Service Bulletins (TSBs) or PCM Software Updates.
  Are there any TSBs or PCM Software Updates that address this DTC?
  
  Yes
  - Perform the appropriate repair outlined in the TSB.
  - If there is a software update, use the scan tool to reflash the PCM with the latest calibration.
  - Perform the POWERTRAIN VERIFICATION TEST. Refer to POWERTRAIN VERIFICATION TEST .
  No
  - Replace the Particulate Matter (PM) Sensor in accordance with the Service Information.
  - Perform the POWERTRAIN VERIFICATION TEST. Refer to POWERTRAIN VERIFICATION TEST .