LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1573 (6.7L Diesel - DTCS P065A To P209F - 2500 Hd) >> DTC Troubleshooting >> P200E-Catalyst System Over Temperature (Bank 1) >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module detected the temperature at the DPF catalyst outlet temperature sensor was greater than 650°C [1202°F] for more than 85 seconds. The PCM illuminates the red Stop Engine lamp immediately after this diagnostic runs and fails.