Torque Specifications - Gas Engine
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GAS ENGINE - TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Bolt - Automatic Belt Tensioner | 55 | 41 | - |
| Bolt - Automatic Belt Tensioner Pulley | 61 | 45 | - |
| Bolt - Bypass Tube, Lower | 28 | 21 | - |
| Bolt - Bypass Tube, Upper to EGR | 12 | 9 | - |
| Bolts - Coolant Recovery Container | 8 | - | 71 |
| Engine Mounted Fan Shroud Brackets (Upper and Lower) | 24 | 18 | - |
| Fan Shroud Ring to Fan Shroud Brackets | 12 | 9 | 106 |
| Bolt - Block Heater | 12 | - | 106 |
| Bolts - EGR Valve | 9 | - | 80 |
| Bolts - EGR to Engine Block | 28 | 21 | - |
| Bolts - EGR Exhaust Tube | 28 | 21 | - |
| Bolts - EGR Heat Shield | 6 | - | 53 |
| Bolts - Fan Shroud to Radiator Mounting | 10 | 7 | 89 |
| Bolt - Idler Pulley | 50 | 40 | |
| Bolts - Radiator to Support | 8 | - | 71 |
| Bolts - Fan Blade to Viscous Fan Drive | 24 | 18 | - |
| Fan Drive | 25 | 18 | - |
| Bolts - Thermostat Housing - 5.7L | 28 | 21 | - |
| Bolts - Thermostat Housing - 6.4L | 30 | 22 | - |
| Bolts - Power Steering Oil Cooler | 8 | - | 71 |
| Bolts - Transmission Auxiliary Oil Cooler | 6 | - | 53 |
| Bolts - Water Pump - 5.7L | 24 | 18 | - |
| Bolts - Water Pump - 6.4L | 28 | 21 | - |
| Nut - EGR Intake to Cooler | 23 | 17 | - |
| Nut - EGR Intake to Exhaust Manifold | 23 | 17 | - |
| Plug - Bleed | 6 | - | 53 |