LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1569 (Engine Cooling System - 2500 Hd) >> Engine >> Sensor, Coolant Level >> Removal

Sensor, Coolant Level: Removal

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate both of the negative battery cables.
  2. Remove the right front tire and wheel assembly.
  3. Remove the right front wheelhouse splash shield (Refer to REMOVAL ).
    GC0180001Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the coolant level sensor wire harness connectors (1).
    GC0180011Courtesy of CHRYSLER GROUP, LLC
  5. Remove the coolant level sensor (1).
scientia non olet · About LEMON Manuals