Bottle, Coolant Recovery: Installation
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Align the coolant recovery bottle (2) to the radiator support and push the coolant recovery bottle (2) into place.NOTE:
The lower support bolt is located under the lower active shutter seal. Image shown without the active shutter for clarity.
- Install the coolant recovery bottle (2) to radiator support bolts (1 and 3). Tighten the bolts to 10 N.m (89 in. lbs.).
- Connect the recovery hose to the radiator.
- Install the front grille. Refer to GRILLE, INSTALLATION .
- Fill the cooling system. Refer to STANDARD PROCEDURE .
- Test the system for leaks. Refer to DIAGNOSIS AND TESTING .