LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1569 (Engine Cooling System - 2500 Hd) >> Accessory Drive >> TENSIONER, Belt >> Removal >> 6.7L Diesel

6.7L Diesel

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0155262Courtesy of CHRYSLER GROUP, LLC
WARNING:

Because of high spring pressure, do not attempt to disassemble automatic tensioner. Unit is serviced as an assembly.

  1. Reposition the serpentine drive belt. Refer to BELT, SERPENTINE, REMOVAL .
    NOTE:

    It is not necessary to completely remove serpentine belt from the vehicle.

  2. Remove bolt (2) and the belt tensioner (1).