LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1569 (Engine Cooling System - 2500 Hd) >> Accessory Drive >> Pulley, Idler >> Installation >> 6.4L

Pulley, Idler: Installation: 6.4L

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0091800Courtesy of CHRYSLER GROUP, LLC
  1. Position the idler pulley (2).
  2. Install the idler pulley (2) bolt. Tighten the bolt to 54 N.m (40 ft. lbs.).
  3. Install the accessory drive belt (4). Refer to BELT, SERPENTINE, INSTALLATION .
scientia non olet · About LEMON Manuals