Torque Specifications
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
TIRES & WHEELS TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Spare Tire Winch | 52 | 38 | - |
| TPM Module Bracket Mounting Nut | 8 | - | 71 |
| Tire Pressure Sensor to Valve Stem Mounting Screw | 1.4 | - | 12 |
BASE 2500 HD & 3500 HD TORQUE SPECIFICATIONS
| Lug Nut/Bolt Torque | Lug Nut/Bolt Type | **Lug Nut/Bolt Size | Lug Nut/Bolt Socket Size | |
|---|---|---|---|---|
| 130 Ft-Lbs (176 N.m) | Cone | M14 x 1.50 | 22 mm | |
| 129 Ft-Lbs (175 N.m) | Flanged | |||
CHASSIS CAB TORQUE SPECIFICATIONS
| Lug Nut/Bolt Torque | Lug Nut/Bolt Type | **Lug Nut/Bolt Size | Lug Nut/Bolt Socket Size | |
|---|---|---|---|---|
| 130 Ft-Lbs (176 N.m) | Cone | M14 x 1.50 | 22 mm | |
| 129 Ft-Lbs (175 N.m) | Flanged | |||
**Use only your Authorized Dealer recommended lug nuts/bolts and clean or remove any dirt or oil before tightening.
NOTE:
Dual wheels are flat mounted, center piloted. The lug nuts are a two-piece assembly. When the tires are being rotated or replaced, clean these lug nuts and add two drops of oil at the interface between the lug nut/bolt and the washer.
Do not oil wheel studs.