LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1565 (Lamps/Lighting - Exterior - (Service Information) - 2500 Hd) >> Lamp, Tail Stop Turn >> Installation >> Bracket - Cab And Chassis

Bracket - Cab And Chassis

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0137106Courtesy of CHRYSLER GROUP, LLC
  1. Position the tail lamp bracket (1) to the outer frame rail (3). Be certain to engage the anti-rotation tab (2) in the frame clearance hole (upper hole - left side, or lower hole - right side).
  2. Install and tighten the screw (4) that secures the bracket to the frame. Tighten the screw to 55 N.m (41 ft. lbs.).
  3. Reinstall the tail lamp onto the bracket. Refer to LAMP, TAIL STOP TURN, INSTALLATION .
  4. Reconnect the battery negative cable.
scientia non olet · About LEMON Manuals