LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1564 (Body - Interior & Exterior - 2500 Hd) >> Winch >> Rollers, Wire Rope Guide >> Removal

Rollers, Wire Rope Guide: Removal

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0109989Courtesy of CHRYSLER GROUP, LLC
  1. Move the clutch lever (2) to "Free Spool" and disengage the wire rope. Pull out a portion to give it some slack.
    GC0109980Courtesy of CHRYSLER GROUP, LLC
  2. Remove the clips (1).
  3. Remove the roller axle rods (3) and remove the rollers (4) from the support bracket (2).
    GC0109990Courtesy of CHRYSLER GROUP, LLC
  4. Separate the bushings (1) from the rollers (2) and replace if necessary.
    GC0109991Courtesy of CHRYSLER GROUP, LLC
  5. Remove the clips (3).
  6. Remove the roller axle rods (2) and remove the rollers (4) from the support bracket (1).
    GC0109992Courtesy of CHRYSLER GROUP, LLC
  7. Separate the bushings (2) from the rollers (1) and replace if necessary.
scientia non olet · About LEMON Manuals