Section 1564 (Body - Interior & Exterior - 2500 Hd): Winch: Bracket: Installation
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Install the support bracket (1) and install the bolts (3).
- Tighten the bolts to 108 N.m (80 ft. lbs.).
- Position the wire rope through the roller opening and install the roller (4), shaft (3) and clip (1).
- Install the frame bracket (2) and install the upper bolt (1) and nut (4) and hand tighten.
- Install the winch (2). Refer to WINCH, INSTALLATION .