LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1564 (Body - Interior & Exterior - 2500 Hd) >> Weatherstrip/Seals >> Weatherstrip, Windshield, A-Pillar >> Installation

Weatherstrip, Windshield, A-Pillar: Installation

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0089172Courtesy of CHRYSLER GROUP, LLC
  1. Ensure the sheet metal is clean and free of debris.
  2. Starting at the front of the windshield, install the windshield weatherstrip (1) to the vehicle.
  3. Ensure to engage the retainers along the side of the windshield.
  4. Continue to install the weatherstrip pressing down firmly to ensure proper adhesion.
scientia non olet · About LEMON Manuals