LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1564 (Body - Interior & Exterior - 2500 Hd) >> Weatherstrip/Seals >> Seal, A-Pillar >> Installation

Seal, A-Pillar: Installation

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0088951Courtesy of CHRYSLER GROUP, LLC
  1. Place the A-pillar seal (1) into position to the door.
  2. Install the seal to the seal retainers on the door.
  3. Close the door and verify a proper seal.